All posts tagged China

How Chinese Textile Industry Survived The Financial Crisis

By blogger on

The impacts of the financial crisis had deprived Chinese textile industry of a large amount of profits. A large number of employees were laid off and the gloomy market demand had indeed made the bad situation even worse.

The decreased sales results had caught the attention of the government. From the second half of 2008, government had increased four times in total the export tax rebate rate, from 11 percent to 16 percent. This conduct of government had enabled the textile industry to regain its competitiveness in the market. Gradually, the textile industry started to get itself back on the right track.

Government played a vital role in dragging the textile industry out of the financial crisis. In 2009, the textile industry went through a series of structure adjustment and scope expansion under the support of the government. Government reinforced its investment in the textile industry to ensure its smooth recovery. The government also established a special fund which was designed to introduce advanced techniques to the further development of textile industry.

Moreover, the relevant textile companies conducted a series of reflections and questioned themselves: what made them so fragile under the attack of financial crisis. It was during this period of time that the textile underwent reorganization and re-construction. It began to dedicate to polishing their brands, developing new brands of excellent quality and affordable price. For instance, the MH Industry Co., Ltd shifts its focus to providing the customers with access to products of high quality and reasonable price.

Besides, it dawned on the textile industry that the cheap labor cost in China was not the permanent advantage for them to compete in the international market. Consequently, the textile industry spent a considerate amount of capital importing technical equipment from foreign countries. In 2009, the sales figure and growth rate of textile industry improved significantly.

The Chinese textile industry has grasped the opportunity for development in the new century. It has fully taken advantage of the optimized industry system and adopted various advanced technologies and management experience. In the same time, it encourages innovation and creativity. In addition, it pays equal attention to explore both domestic and international market. However, there are still problems waiting to be solved. For example, the technical investment is too insufficient to meet the demands of the consumers. The textile industry lacks professional talents and expertise. Unlike other textile industry in western countries, Chinese textile industry appears dull by comparison in term of integrating itself to fashion industry.

Nevertheless, the future lying ahead is nothing but bright and promising. You can refer to the mh-chine.com and find more relevant information.

Mining machinery industry still needs further efforts

By blogger on

As the major industry of national economy, the mining machinery has played a major role in our country”s development in economy and social area. Applied in deep-processing and constructive exploration area ,the mining equipments have continuously provided quantities of infrastructure industry products and energy for all walks of life , which has greatly promoted the rapid development of our national economy. For all above these, the mining equipment manufacture has played as the basement of our country”s independent industrial system, which has also become a key signal to the balance of one country”s industrial strength.

To the 2011 development trend in mining equipment, Henan Hongxing shows that world mining machinery will experience the most rapid growing in 2011.And to China mining machinery manufacturer ,the development opportunity is very valuable .And our enterprises must rapid the independent research and innovation pace and set up a comprehensive after-sales service network .Meanwhile, we should proceed the market trend to organize production , optimize product structure ,explore market, balance the ends to seek more fast and better development, which have become the major challenge in China domestic mining market.

Integrated domestic demand and export growth, HC Construction Machinery Network believes that in 2009 the domestic construction machinery industry sales growth rate may be 23% or so. To give a intensive research to the current development of mining equipments in the global market and particular in the advanced technology of crushing and grinding equipments ,we mining manufacturers will definitely provide more quality and high-efficient equipments with world level for our country”s coal, metal and non-metal mining development, which will play an significant role in the need of national economic development of energy and materials.

And we mining machineries should see the present development opportunity to continuously improve the technical service level to solid the market share and also strengthen the research .We mining markets will challenge the technical innovation wave with high enthusiastic.

As a key component of mining machinery, the crushing grinding equipments include various crushing equipments like jaw crusher and other grinding equipments , super fine micro grinding mill and super-huge grinding mill .The grinding and crushing equipments have not only found their extensive application in the material fine-processing field of mine, electricity, chemic, construction but also provide equipments with high-efficient and reliable technical backup for the construction of railway, roadway, hydropower ,municipal project and so on.

India Lighting Industry Vs China Light Fittings Luminaries Industry

By blogger on

India light fitting industry is facing the burnt from China. China manufacturing sector is growing a lot as they spend a lot of money in research and development and develop the product in very reasonable cost. The cost of Chinese products is much lesser than India and the cost of Indian lighting products is far lesser than America or any other nation. Thus the best two countries thus left in competition are India and China for light fittings and Lighting solutions industry.
1.Lighting solutions and light fitting manufacturers in India are highly skilled and they produce really high quality products
2.The replacements that come in Chinese products are more than the replacements that come in Indian manufacturing products
3.China products are developed in high research and development machinery thus they cost high but as the government in china is really supportive thus they save on taxes and they earn through bulk orders and turnover sales.
4.Companies like General Electric and Philips are the tycoons for innovations and all innovation go through them. These companies have heavily invested in the Indian and Chinese markets
David C Philips, managing director, Philips – He said, thanks to China and India, the global construction equipment industry has recovered to project sales revenues of $82 billion in 2011 as against $77 billion in 2010 and $55 billion in 2009 after peaking at $100 billion in 2007. As of 2012 Philips is the largest manufacturer of lighting in the world.
Thus a huge competition is among these two countries. People from India are going to china and they get the imports done for the raw materials or the finished products and sell them in India now but this can be done till the time the import duty is not set high . If government will increase the import duty then it will be good for Indian manufacturers as Chinese products will come less in our country and more of Indian manufacturing products can be sold here and developed here.
The laws for the labor are strict in china but the laws for labor are very liberal in INDIA. Indian Government is somehow not supporting the manufacturing sector; otherwise India can grow 4 times of China in lighting sector. It is a need of an hour for the government to understand that they are doing no good for the country.

The economies of large scale enterprise or small scale enterprise both are very fragile at this moment. The mismanagement of economies weakening rupee, rising petrol all are visible factor for growing mismanagement of the Indian economy.
Thus major lighting industry focusing on domestic luminaries, street light fittings manufacturing, etc should be given encouragement by making stringent labor laws and lesser taxes should be levied such that products can be made at low cost.

Sand industry relies on the new type equipment

By blogger on

Sand and stone are the important raw material that is used in engineering construction. At present, especially because of the wide application of concrete building structure, the amount of the sand and stone manufacturing line used is also increasing constantly and mining companies are asking more and more to the quality of these raw materials and require them to catch up the technological standard in the developed countries in a basic way.
In order to distinguish self mills from conventional mills, the mill with mental mediums (Like balls and rods) added are called conventional mills, such as Ball Mills and Rod Mills . They eash has different features. How to choose an appropriate mill according to the nature of the ores and materials size according to the Beneficiation Process. It plays a very important role on getting high grinding efficiency and improving the economical effects of grinding requires. Ball mills and rod mills ore factory always use have following features and applications.
For this reason, more and more mining enterprises choose to expand into the concrete and stone and sand aggregate industry. Last year, the excess production capacity in the cement industry caused downturn of this market, so that many large-sized cement manufacturing companies are seeking for new market. Some enterprises want to embark on transformation and upgrading, increase the development advancement of the company and strive for new economic increase points. With the approaching of the tide that the cement industry speeds up to integrate the resources and many companies merge and recombine together, many of them are transform and march into the relevant industry and the stone and sand production is one of them.
Although the sand and stone manufacturing industry rely on the application of new type equipment such as crushers and sand making device and the production capacity has been improved significantly, the number of the other industries that advance into the stone and sand market is very large, different knowledge and superficial comprehension to this field,
Hongxing Machinery thinks that exploitation of the mining tailings and artificial sand is the important way to replace the building-used sand and this way we can solidify and develop environmental protection and increase the resource use rate. >

With its high quality products such as China vibrating feeder, Cement plant, Clinker rotary kiln, Cement making plant, Vibrating feeder, Henan Hongxing mining machinery Co.Ltd has ascended in the front rank of the world in the exporting of mining equipments.

Earthquake’s Influence On Japanese Electrical Component Industry

By blogger on

Japan is the world’s largest production base of RCL and quartz equipment. This earthquake has not jeopardized the factories heavily, but the supply of power and raw material is becoming short. Then the production of the device factory will be influenced. This influence can not be eliminated in the future three to nine months, which makes the short supply worse. The influence is huge especially in the aluminum electrolytic capacitor and MLCC industry which have high demand of power and accuracy. Many component magnates, such as Nichicon, Nippon-Chemicon and TDK, admitted that they had influenced by the earthquake. On one hand, they are worried about the capacity, on the other hand, they predicates the opportunities brought to China. I will describe some markets in the below part of my article.

First is the inductance. The Japanese chip inductor takes eighty-one percent all over the world. In this earthquake, many corporations had closed some of their factories.

Second is the capacitance. The place where the earthquake happened is the concentrated zone of aluminum electrolytic capacitor industry. Take the Nichicon for instance. Geographically, there are four places influenced by the disaster, namely Nagano, Hotaka, Ohmachi and Tomita. The other Corporations are similar with Nichicon. These entire situations give a blow to the industry chain. For the long term, this disaster will change the structure of the Japanese aluminum electrolytic capacitor industry deeply. The places which have suffered from unclear radiation will be closed for a long time or even forever, and then the manufacturers should move the industry chain outward.

Third is the resistance. It is reported that three factories of the Murata had left off work. Time is needed to calculate the loss. These factories are hard to recover to the original condition. Forth is the protection components. The factories of the protection components are not located in the north of Tokyo, so the earthquake has a little influence on it. Besides, the protection components are not accurate. The capacity will not be hindered if the devices are not broken. All in all, the influence brought by the earthquake is limited. The related integrated circuit is KTD1863.